Tools and Tyre Mobility SystemTools and Tyre Mobility System  - Self-help - Self-help - Audi S5 Owner's Manual - Audi S5

The tools and the Tyre Mobility System are stored under the floor panel in the luggage compartment.

Fig. 225 Luggage compartment: Tools, Tyre Mobility System and jack
Fig. 225 Luggage compartment: Tools, Tyre Mobility System and jack

If you need the tools, the Tyre Mobility System or the jack*, you will have to open the floor panel and take out the spare wheel.

The tool kit includes:
• A hook for removing hub caps
• Pin for mounting a wheel
• Screwdriver with reversible blade
• Tool for changing bulbs
• Interchangeable socket (Torx socket for changing bulbs)
• Crank handle for jack
• Adapter for anti-theft wheel bolts*
• Jack*
• Box spanner for wheel bolts
• Towline anchorage

Some of the parts listed are only fitted on certain models or are optional extras.

Before stowing the jack* again, wind down the arm of the jack as far as it will go.

• Do not use the hexagonal socket in the screwdriver handle to tighten the wheel bolts. It is not possible to tighten the bolts with the required torque – risk of accident.
• The jack supplied by the factory is only designed for changing wheels on this model. On no account attempt to use it for lifting heavier vehicles or other loads – risk of injury.
• Never start the engine when the vehicle is on the jack - risk of accident.
• If work has to be done under the vehicle, ensure that it is safely supported on stands designed for the purpose, otherwise there is a risk of injury.