Bulb holders with a bayonet fastener
Fig. 245 Diagram: Bulb holder with a bayonet fastener
In the case of bulb holders with a bayonet fastener please proceed as follows:
Removing the bulb holder
– Turn the bulb holder in the direction of the arrow A ⇒ fig. 245 as far as it will go and then take the bulb holder out of the light unit.
Fitting the bulb holder
– Insert the bulb holder into the light unit, making sure you
keep the bulb holder straight, i.e. the rubber seal makes
even contact all around.
– Turn the bulb holder in the direction indicated by the arrow B ⇒fig. 245 as far as it will go.