Fig. 248 Trim cover for fog light
Fig. 249 Screws securing fog light
The description for changing the bulb refers to the left fog light; in principle the same procedure applies to the right fog light.
– Switch off the ignition and the lights.
– Detach the trim cover ⇒ fig. 248 (pull it carefully in the direction of the arrow).
– Remove the two securing screws ⇒ fig. 249 and pull the fog light unit out of the bumper.
– Unplug the electrical connector.
The trim cover is secured to the bumper by several retaining hooks.
Do not use force when removing the trim cover to avoid damaging it.