Exterior lighting settings
You can change the settings for these functions on the sound system or MMI*.
Display: Exterior lighting
– Select: Function selector button CAR > Exterior lighting.
The coming home function lights up the area round the vehicle after dark when the ignition has been switched off and the driver's door opened. This function can be set to operate for a time interval between 0 (off) and 60 seconds. The coming home function is operational when the light switch is set to AUTO.
The leaving home function lights up the area round the vehicle after dark when the vehicle is unlocked. The function can be switched on or off as required. The leaving home function is operational when the light switch is set to AUTO.
The sensitivity of the light sensor (i.e. how soon the lights are switched on) can be adjusted.
Daytime running lights*
The daytime running lights are switched on and off together with the ignition.
On vehicles for some markets the daytime running lights cannot be switched off if the vehicle has halogen headlights.
Headlamp converter* for driving abroad
The asymmetric low beams of the headlights are designed to light up the near side of the road more intensely. If you drive a right-hand drive vehicle in a left-hand drive country, or vice versa, you will dazzle oncoming traffic.
Vehicles with xenon headlights*: The headlamp converter should be switched on to avoid dazzling oncoming traffic.
Vehicles with halogen headlights: Opaque stickers should be applied to certain parts of the headlight lenses. For further information, please consult an Audi dealer or other qualified workshop.