Setting the speed
Control lever for: Setting speed
Important: The system must be switched on.
– Drive at the desired speed. The speed must be in the range between 30 and 200
– Press the SET button -arrow- ⇒ fig. 139 to confirm the target speed you wish to store.
When the SET button is released, the current speed is stored in the memory and the vehicle will then maintain this speed.
One or two red diodes will light up in the speedometer dial to mark the speed which is currently stored in the system. At the same time, the speed will briefly be displayed in the system status indicator.
For safety reasons, the speed setting will be deleted when the ignition is switched off.